The hot-rolled pure alloy EN 10025-2 S235J2 grade steel is a kind of fine-grain steel welded structure with alternating loading. EN 10025-2 S235J2 grade steel is not suitable for heat treatment. Allow stress relief annealing. EN 10025-2 S235J2 grade steel delivery conditions +N products can be hot formed and/or standardized after delivery.
EN 10025-2 S235J2 grade steel chemical composition
Grade |
EN 10025-2 S235J2 grade steel chemical composition |
||||||||
EN 10025-2 S235J2 |
C |
Si |
Mn |
P |
S |
N |
Cu |
||
≤16 |
16-40 |
>40 |
|||||||
0.19 |
0.19 |
0.19 |
- |
1.50 |
0.035 |
0.035 |
- |
0.60 |
EN 10025-2 S235J2 grade steel mechanical properties
Grade |
EN 10025-2 S235J2 grade steel Mechanical Property |
|||||||||||||
EN 10025-2 S235J2 |
Yield Strength Min Mpa |
Tensile Strength Min Mpa |
||||||||||||
≤16 |
16-40 |
40-63 |
63-80 |
80-100 |
100-150 |
150-200 |
200-250 |
250-400 |
<3 |
3-100 |
100-150 |
150-250 |
250-400 |
|
235 |
225 |
215 |
215 |
215 |
195 |
185 |
175 |
165 |
360-510 |
360-510 |
350-500 |
340-490 |
330-480 |
EN 10025-2 S235J2 grade steel equivalent grades
USA |
GB |
GOST |
BS |
EN old |
A36 |
Q235D |
17G1S |
40EE |
Fe360D2 S235J2G4 |
EN 10025-2 S235J2 grade steel is a non alloy steel. EN 10025-2 S235J2 grade steel is an en chemical name. EN 10025-2 S235J2 grade steel has medium low tensile strength and medium high ductility deformed carbon or non alloy steel.
EN 10025-2 S235J2 grade steel is applied to trucks, transmission towers, dump trucks, cranes, trailers, bulldozers, excavators, forestry machinery, railway trucks, dolphins, pressure rods, pipelines, highway bridges, building structures, oil and gas platforms, offshore structures, shipbuilding, power plants, palm oil equipment and machinery, fans, pumps, lifting equipment.